SECTION 12492

MANUALLY OPERATED WINDOW SHADES

***** Draper manufactures the following manually operated, roll-up fabric window shades for sunlight control and room darkening:

Chain and Clutch Operated FlexShade

Crank Operated FlexShade

Spring Roller Operated FlexShade

Access FlexShade

For each Draper window shade there are options for size, fabric, operator, operator location, method of installation, hardware, and hardware finish. Refer to Draper product literature for availability of options and selection guidelines. Various options are listed in this specification section, but not all options apply to all window shades. The specifier will need to select the appropriate options, verify their availability, and delete non-applicable models and options.

When motorized Draper window shades are to be specified, use SECTION 12493 - MOTORIZED WINDOW SHADES. If a completely opaque window shade system is required, use SECTION 12494 - OPAQUE WINDOW SHADE SYSTEM. If fixed window panels with open weave glare control fabric are to be specified, use SECTION 12495 - SUN CONTROL PANELS. If either manual or motorized skylight shades are to be specified use SECTION 12496 - SKYLIGHT SHADES. Draper's Access Dual Roller FlexShade window shades which can accommodate two types of fabric shade or shade and projection screen combination are specified in SECTION 12497 - DUAL ROLLER WINDOW SHADES. Lastly, manual or motorized, vertical folding window shades can be specified using SECTION 12498 - VERTICAL FOLDING WINDOW SHADES. *****

PART 1 - GENERAL

1.1 SUMMARY

A. Section includes: Manually operated, roll-up fabric window shades including mounting and operating hardware.

B. Related sections:

***** List other specification sections dealing with work directly related to this section such as the following. *****

1. Section 09260 - Gypsum Board Assemblies: Suspended gypsum board ceilings to contain recessed window shades.

2. Section 09510 - Acoustical Ceilings: Suspended acoustical panel ceilings to contain recessed windows.

1.2 SUBMITTALS

A. Submit in accordance with Section 01330 - Submittal Procedures:

1. List of proposed products and product data.

2. Shop drawings showing window openings, dimensions, and attachment method.

3. Samples [for selection by Architect]:

a. Fabrics.

b. Metal finishes.

4. Window Shade Schedule listing rooms, field verified window dimensions, quantities, type of shade, fabric, and color.

5. Manufacturer's installation and maintenance instructions.

1.3 DELIVERY, STORAGE, AND HANDLING

***** In order to reduce potential damage to shades, it is desirable to deliver and install shades after construction is essentially complete. Draper Chain and Clutch Operated FlexShades and Access FlexShades can be installed in aluminum pockets and housings which are designed for early installation as part of ceiling installation. Shade and operating mechanism can be installed later. *****

A. Do not deliver window shades until building is enclosed and construction within spaces where shades will be installed is substantially complete.

B. Deliver products in manufacturer's original, unopened, undamaged containers with labels intact.

C. Label containers and shades according to Window Shade Schedule.

1.4 WARRANTY

***** 5 years warranty is provided for clutch operating mechanism of Draper Chain and Clutch Operated FlexShade. All other shade models and parts are covered by a one year warranty which is standard with typical general conditions of the contract and does not need to be re-stated in this section. Include the following paragraph if Chain and Clutch Operated FlexShades are specified. *****

A. Provide under provisions of Section [01700 - Contract Closeout] [__________]: 5 years warranty against defects in materials and workmanship for clutch operating mechanism.

PARTS 2 - PRODUCTS

2.1 ACCEPTABLE MANUFACTURERS

A. Draper, Inc., 411 South Pearl Street, Spiceland, Indiana 47385-0425; 765-987-7999.

B. Manufacturers of equivalent products submitted and approved in accordance with Section 01630 - Product Substitution Procedures.

2.2 MANUALLY OPERATED WINDOW SHADES

***** Use this article to specify Draper Chain and Clutch Operated FlexShade, Crank Operated FlexShade, and Spring Roller Operated FlexShade. Select type and model of window shade being specified and desired attributes from the following options. *****

A. Type: Manually operated, vertical roll-up, fabric window shade with [bead chain and clutch] [crank] [spring roller] operating mechanism, [mounting brackets,] [fascia,] [headbox,] [ceiling pocket,] fasteners, and other components necessary for complete installation; FlexShade as manufactured by Draper, Inc.

***** There are six methods for mounting manually operated Draper window shades:

Mounted inside window opening and extending from head to sill and jamb to jamb.

Wall mounted and overlapping window opening.

Ceiling mounted and overlapping window opening.

Recessed in ceiling and surface mounted with screws to walls.

Recessed in ceiling and surface mounted with screws to structural ceiling support.

Recessed in ceiling and suspended from structure with suspension rods and brackets. This option is only available for Access FlexShades. *****

B. Method of installation: [Mounted inside of window opening and extending from head to sill and jamb to jamb.] [Mounted to wall and overlapping window opening.] [Mounted to ceiling and overlapping window opening.] [Recessed in ceiling and surface mounted with screws to walls.] [Recessed in ceiling and surface mounted with screws to structural ceiling support.] [Recessed in ceiling and suspended from structure with suspension rods and brackets.]

***** Draper manually operated window shades are provided in three operating styles: chain and clutch, crank, and spring roller. Refer to Draper product literature for selection guidelines. *****

******************************************************************************

***** For Chain and Clutch Operated FlexShade include the following paragraphs. *****

C. Operation: Bead chain and clutch operating mechanism allowing shade to stop when chain is released. Designed never to need adjustment or lubrication. Provide preset limit stops to prevent shade from being raised or lowered too far.

1. Clutch mechanism: Fabricated from high carbon steel and molded fiberglass reinforced polyester or injected molded nylon.

***** Either stainless steel or nylon bead chain is available. *****

2. Control loop: [Stainless steel] [[Ivory] [Grey] [Black] nylon] bead chain hanging at side of window.

***** Standard location for chain is right hand side when facing window from interior and will be provided unless left hand location is specified. *****

3. Chain location: [[Right] [Left] hand side when facing window from interior.] [As indicated on Drawings.]

******************************************************************************

***** For Crank Operated FlexShade include the following paragraphs. ****

C. Operation: Crank and gear box operate [single] [multiple] shades.

1. Gear box: Die cast aluminum and steel construction with 3 to 1 ratio. Injection molded nylon and steel crank insert installed in roller to engage gear box.

***** Crank handle can be detachable or permanently mounted. Handles can be provided in lengths up to 10 feet (3 m). Unless handle length is specified, Draper will provide a standard length based on shade and sill heights. *****

2. Crank handle: [_____] [feet] [m] long [detachable] [permanently mounted] anodized aluminum and chrome plated steel handle.

***** Standard crank location is right hand side when facing window from interior and will be provided unless left hand location is specified. *****

4. Crank location: [[Right] [Left] hand side when facing window from interior.] [As indicated on Drawings.]

******************************************************************************

***** For Spring Roller Operated FlexShade include the following paragraph. *******

C. Operation: Metal roller containing heavy duty spring with positive locking mechanism permitting shade to be stopped at each half turn of roller. Provide cord clasp and braided cotton cord attached to bottom shade slat. Spring sized by manufacturer to accommodate shade size.

******************************************************************************

***** Maximum shade size depends on type of shade and operating mechanism. Refer to Draper product literature for available sizes. Shade size can be shown on Drawings, Window Shade Schedule, or in Specifications. To eliminate potential conflicts, do not indicate size in more than one location. *****

D. Shade size: [[_____] by [_____] [inches] [mm].] [As indicated on [Drawings.] [Window Shade Schedule.]]

E. Roller: Fabricated from extruded aluminum, galvanized steel, or enamelled steel. Diameter, wall thickness, and material selected by manufacturer to accommodate shade type and size. Provide roller idler assembly of molded nylon and zinc-plated steel pin. Sliding pin to allow easy installation and removal of roller.

***** Endcaps are required for Crank Operated FlexShades and are optional for Chain and Clutch Operated FlexShades and Spring Roller Operated FlexShades. Endcaps are also required for attachment of fascia. *****

F. Endcaps: Stamped steel with universal design suitable for mounting to ceiling, wall, and jamb. Provide size compatible with roller size and fasteners appropriate for installation conditions. Finish to be [[black] [white] [ivory] [charcoal bronze] baked enamel paint.] [clear anodized aluminum.]

***** Shades provided without endcaps will require mounting brackets. *****

G. Brackets: Plated stamped steel suitable for mounting to [ceiling] [wall] [jamb]. Provide size compatible with roller size and with fasteners appropriate for installation conditions.

***** Draper Crank Operated FlexShades and Chain and Clutch Operated FlexShades can be provided as multi-panel units on a single roller up to a maximum width of 16 feet (4.9 m). Use the following paragraph to specify carrier bearings required for multi-panel installations. *****

H. Carrier bearings: Stamped steel with molded nylon for supporting multiple shades on single roller. Bearing suitable for ceiling or mullion mounting. Provide one carrier bearing between each pair of adjoining shades.

***** Two or three Crank Operated FlexShades can be controlled from one crank with FlexShade Coupling System. Shades can be different widths but total group width cannot exceed 24 feet (7.3 m) and all rollers must be same diameter. *****

I. Coupling system: Provide system to operate [2] [3] shades from single crank by coupling shade rollers together. System to consist of [wall] [ceiling] bearing brackets and male and female couplings. Crank to be located [right] [left] hand side of group when facing window from interior.

J. Shade slat: Minimum 1/8 by 1 inch (3 mm by 25 mm) aluminum slat encased in heat seamed hem.

***** Chain and Clutch Operated FlexShades can be provided with and installed in pockets fabricated from either sheet or extruded aluminum. Pockets are designed to be installed prior to or as part of ceiling system installation. Window shade assembly can be site installed later after construction operations that might damage shade are complete. There are two types of pocket, Type C Pocket and Type D Pocket. Include the following paragraph if aluminum pockets are required. *****

K. Shade pocket: Rectangular pocket designed for recessed ceiling installation of window shades; Type [C] [D] FlexShade Pocket as manufactured by Draper, Inc.

******************************************************************************

***** For Type C FlexShade Pocket use the following paragraphs. Type C Pocket will only accommodate limited size shade bundles. Shade bundle size will vary with height of screen and fabric type. Contact Draper to verify that specified size shade and type of fabric will fit Type C Pocket. *****

1. Material: Sheet aluminum alloy with white epoxy paint finish.

2. Size: [3-1/4 by 3-1/4 inches] [83 mm by 83 mm].

3. Closure panel: Removable closure panel clips to bottom of pocket to form [1 inch] [25 mm] opening for passage of shade.

4. Clutch unit integral with endcap and includes nylon chain guides and leveling mechanism.

******************************************************************************

***** For Type D FlexShade Pocket use the following paragraphs. *****

1. Material: Extruded aluminum alloy with white epoxy paint finish.

2. Size: [4-1/2 by 4-1/2 inches] [114 mm by 114 mm].

3. Closure panel: Removable closure panel clips to bottom of pocket to form [1-1/8 inch] [29 mm] opening for passage of shade.

4. Provide pocket with [7/8 inch] [22 mm] lip at lower edge for support of acoustical ceiling panel.

***** Endcaps for Type D FlexShade Pocket can be provided with or without acoustical ceiling panel support lip. *****

5. [Provide endcaps with [7/8 inch] [22 mm] lip for support of acoustical ceiling panel.]

***** Type D FlexShade Pocket can be provided with corner sections where window shade recess continues around two walls. Pocket ends can also be provided. *****

6. Corners: Welded one-piece aluminum sections connecting to and matching pockets to allow continuous shade recess at ceiling corners.

7. Pocket ends: Welded one-piece aluminum sections connecting to and matching pockets.

******************************************************************************

***** Draper manually operated window shades can be installed in a ceiling recess site constructed from light gage metal framing and gypsum board or other materials. For this condition, use the following paragraph and subparagraphs to specify aluminum removable closure panel to be installed leaving a minimal slot for passage of shade. *****

L. Closure panel: For site constructed ceiling recesses, provide removable closure panel to minimize slot for shade passage but allowing access to shade for maintenance.

1. Material: Aluminum alloy with white epoxy paint finish.

2. Closure width: [2 inches] [3-1/4 inches] [50 mm] [83 mm].

3. Provide continuous wall clip, [1-13/16 by 1/4 inch] [46 mm by 6 mm], for snap-in attachment of closure panel without fasteners.

***** Draper manually operated shades can be provided with aluminum fascia concealing shade roller and hardware. Fascia can be mounted inside window opening extending from jamb to jamb or mounted outside and overlapping window opening. Fascia is attached to endcaps. Fascia can be provided in lengths up to 16 feet (4.9 m) and either 3-7/8 or 4-5/8 inches (98 mm or 117 mm) high. If fascia is required, include the following paragraphs. *****

M. Fascia: L shaped aluminum extrusion, [0.06 inch] [2 mm] minimum wall thickness, to conceal shade roller and hardware.

1. Attachment: Snaps onto endcaps.

***** Fascia can cover multiple shades only if shades utilize a single operator. *****

2. Size: [3-7/8 inches] [4-5/8 inches] [98 mm] [117 mm] high by [[_____] [inches] [mm] long.] [length required for [single] [multiple] shades as indicated on Drawings.]

3. Finish: [Clear anodized.] [[Black] [White] [Ivory] [Charcoal bronze] baked enamel paint.]

***** Draper manually operated shades can be provided with aluminum headbox designed for exposed surface installation. Headbox consists of removable fascia, L-shaped back and top, and endcaps. Headbox is provided in two sizes. Refer to Draper product literature for required sizes based on window and roller size. If headbox is required, include the following paragraphs. *****

N. Headbox: Aluminum fabrication with removable L-shaped fascia, endcaps, and L-shaped back and top cover piece:

1. Size: [[3-1/2 inches] [89 mm] high by 4 inches [102 mm] wide] [[4-3/4 inches] [121 mm] high by [4-3/4 inches] [121 mm] wide] by length required for shade being provided.

2. Finish: [Clear anodized.] [[Black] [White] [Ivory] [Charcoal bronze] baked enamel paint.]

2.3 RECESSED SHADE IN ALUMINUM HOUSING

***** Use this article to specify Draper Access FlexShade which has an extruded aluminum housing designed to be installed prior to or as part of ceiling system installation. The manually operated window shade assembly can be site installed later after construction operations that might damage shade are complete. If the motorized model of Access FlexShade is required, use SECTION 12493 - MOTORIZED WINDOW SHADES to specify this option. *****

A. Type: Manually operated, vertical roll-up, fabric window shade with chain and clutch operating mechanism and extruded aluminum housing to be recessed mounted in ceiling including brackets, fasteners, and other components necessary for complete installation; Access FlexShade as manufactured by Draper, Inc.

***** There are three methods for mounting Access FlexShades:

Recessed in ceiling and surface mounted to wall with screws.

Recessed in ceiling and surface mounted with screws to structural ceiling support.

Recessed in ceiling and suspended from structure with suspension rods and brackets. *****

B. Method of installation: [Recessed in ceiling and surface mounted with screws to wall.] [Recessed in ceiling and surface mounted with screws to structural ceiling support.] [Recessed in ceiling and suspended from structure with suspension rods and brackets.]

C. Housing case:

1. Extruded aluminum housing with white paint finish and stamped steel end covers. Bottom closure panel forms slot for passage of window shade and is removable for access to shade and operating mechanism. Bottom perimeter flange provides [support and trim for acoustical ceiling panels] [trim for gypsum board ceiling].

2. Housing designed to be installed separately from shade as part of ceiling system installation. Shade and operating mechanism can be site installed later after construction operations that might damage shade are complete.

3. Nominal size: [4-1/2 inches wide by 5-3/8 inches high] [114 mm wide by 137 mm high] by length required by window opening.

***** Manually operated Access FlexShade is typically provided with metal bead chain and clutch. As an option, nylon chain in either ivory, grey, or black is offered. *****

C. Operation: Chain and clutch operating mechanism allowing shade to stop when chain is released. Designed never to need adjustment or lubrication. Provide preset limit stops to prevent shade from being raised or lowered too far.

1. Clutch mechanism: Fabricated from high carbon steel and molded fiberglass reinforced polyester or injected molded nylon.

2. Control loop: [Stainless steel] [[Ivory] [Grey] [Black] nylon] bead chain hanging at side of window.

***** Standard location for chain is right hand side when facing window from interior and will be provided unless left hand location is specified. *****

3. Chain location: [[Right] [Left] hand side when facing window from interior.] [As indicated on Drawings.]

2.4 FABRIC

***** Draper provides 18 fabrics for window shades.

SheerWeave Series SW3000

SheerWeave Series SW2000

SheerWeave Series SW2100

SheerWeave Series SW2900

SheerWeave Series SW2600

SheerWeave Series PW3500

SheerWeave Series PW4100

SheerWeave Series PW4400

SheerWeave Series PW4800

SunBloc Series SB9000

SunBloc Series SB9100

E Screen

T Screen

Flocke

Obion

Nocturne II

M Screen

XL2

Refer to Draper product literature for available shade fabrics and selection guidelines. *****

A. Material: [Vinyl coated fiberglass and vinyl coated polyester woven into 63 x 15 mesh; SheerWeave Series SW3000] [500 denier fiberglass, vinyl coated and woven into a 2 x 2 basketweave; SheerWeave Series [SW2000] [SW2100] [SW2900] [SW2600]] [Vinyl coated polyester yarn woven into basketweave pattern; SheerWeave Series [PW3500] [PW4100] [PW4400]] [Vinyl coated polyester with maximum UV blockage; SheerWeave PW4800] [Close woven fiberglass base textile with sun-resistant vinyl film bonded to each side, opaque with minimum tensile strength of 190 pounds for warp and 180 pounds for fill; SunBloc Series [SB9000] [SB9100]] [PVC coated fiberglass yarn woven in 2 x 2 basketweave; E Screen] [PVC coated fiberglass woven mesh; T Screen] [Opaque, fiberglass textile with acrylic backing; Flocke] [Translucent fiberglass textile with white exterior and soft woven interior; Obion] [Coated polyester; Nocturne II] [PVC coated fiberglass in 1 by 2 weave; M Screen] [PVC coated glass yarn with 5 percent open area; XL by Hexcel] [PVC coated glass yarn; XL2 by Hexcel] as provided by Draper, Inc.

***** Refer to Draper product literature for attributes of selected fabric. *****

B. Attributes:

1. Weight: [_____] ounces per SY.

2. Thickness: [_____] inch.

3. Roll width: [_____] inches.

4. Average open area: [_____] percent.

5. [Fire retardant,] [washable,] [stain resistant,] [anti-static treated,] [__________].

***** Refer to Draper fabric samples for available fabric colors and patterns. *****

C. Color and pattern: [[__________], No. [_____].] [As indicated in Color Schedule on Drawings.] [As selected by Architect from manufacturer's standard range.]

PART 3 - EXECUTION

3.1 PREPARATION

A. Field verify window dimensions prior to fabrication.

B. Coordinate requirements for blocking [, construction of shade pockets,] and structural supports to ensure adequate means for installation of window shades.

***** For window shades recessed in ceilings, include the following paragraph. *****

C. Coordinate installation of recessed shades with construction of suspended [acoustical panel] [gypsum board] ceilings specified in Section [_____] - [__________].

3.2 INSTALLATION

A. Install window shades at locations indicated on Drawings and approved Window Shade Schedule.

B. Comply with shade manufacturer's written instructions and approved shop drawings.

***** Draper FlexShade Pockets are designed to be installed prior to or as part of ceiling system installation. Shade and operating mechanism can be site installed later in pockets after construction operations that might damage shade are complete. If pockets are to be installed, include the following paragraph and subparagraphs. If not, delete. *****

C. Shade pockets:

1. Install shade pockets [prior to] [in conjunction with] installation of suspended ceiling system. Attach to supporting structure with screws through top of pocket at [24 inches] [610 mm] minimum centers.

[2. Install [corner pieces] [and] [pocket ends] securely and in alignment with pockets.]

3. After interior construction is essentially complete, install shade and operating mechanism in pocket.

***** Draper Access FlexShades are provided with extruded aluminum housings designed to be installed prior to or as part of ceiling system installation. Later, shade and operating mechanism can be site installed in housing after construction operations that might damage shade are complete. If Access FlexShades are to be installed, include the following paragraph and subparagraphs. If not, delete. *****

C. Shade housing:

1. Install shade housing [prior to] [in conjunction with] installation of suspended ceiling system. Attach to supporting structure with screws through top of pocket at [24 inches] [610 mm] minimum centers.

2. After interior construction is essentially complete, install shade and operating mechanism in pocket.

D. Position shades level, plumb, and at proper height relative to adjacent construction. Secure with brackets and fasteners recommended by manufacturer.

***** Include the following paragraph if fascia or separate closure for site constructed recess is being provided. Note fascia is not applicable if pockets are being provided. *****

[E. Install [fascia] [closure panels] [endcaps] to conceal roller and operating mechanism. Do not use exposed fasteners.]

3.3 ADJUSTING AND CLEANING

A. Operate shade through complete cycle of lowering, stopping, and raising to ensure proper operation. Adjust as required for smooth operation.

B. Clean shade assemblies and protect from damage from construction operations. If damage occurs, remove and replace damaged components or entire unit as required to provide units in their original, undamaged condition.

3.4 WINDOW SHADE SCHEDULE

***** For large projects with several types of shades and fabrics, a window shade schedule may be appropriate. Schedule may be located in this specification section or located on drawings. *****

______________________________________________________________________________

ROOM QUANTITY WIDTH HEIGHT SHADE TYPE FABRIC COLOR

______________________________________________________________________________

END OF SECTION