MULTIFUNCTIONAL
DRAPERY HARDWARE
Product Specs |
Installation Info.
Assembly Info. |
KS Colourline
Tools & Bending
Info. |
Installation Application
Assembly Information
The KS System is well known for its quick time-saving assembly, and simple installation. Here are some guide
lines to make it even easier.
| 1. |
Cut the size track needed (use the KS Cutting
Tool 5050-00 for precise cutting) |
| 2. |
Place 1 endstop (any one of our endstops will
work) on 1 side of the track to prevent carriers from sliding off while loading the carriers. |
|
| A. |
For pinch pleat use Carrier 2001-**.
These carriers come 10 on a handy breakaway strip. Slide the whole strip into the track using approx. 4
carriers p/ft. After loading enough carriers, simply break off the strip and you are done. Make sure
that if you use a master carrier(s) to include that in your carrier count. |
| B. |
For cubicle curtains use Carrier w/metal
hook 2201-** or Breakaway Carrier. Use approx. 2.5 carrier p/ft. Slide as many carriers in as needed;
masters are mostly not used. |
| C. |
For specialty pleating tape use Shirrtape
Carrier 2201-**. Use approx. 5 carriers p/ft. Hook the carriers to your treatment and after installation
of the track "klick" or slide the carriers onto the track. |
| D. |
For Accordiafold or Stackpleat use the
Snap Carrier 2004-**. Use approx. 5 carriers p/ft and use with master carriers 2525-** & 2526-** (or
2527-25 & 2528-25) in conjunction with the small stiffener. |
| E. |
For Ripplefold or Rollpleat use the
Connected Snap Carrier 2100-25 for 100% fullness, 5.2 carriers p/ft. Use with master carriers 94158 &
94159 from Kirsch. |
|
| 3. |
After loading the track with carriers, place
the following brackets on the track before installation: 3001-** Ceiling Bracket - 3201-** & 3202-** Wall
Bracket 1-3/8" & 2-3/8" - 3300-** Clips f/Extension Bracket (for use with Extension Brackets). Use enough
brackets to hold the weight of your draperies. Brackets need to be place it between 24" & 36" depending on
weight of the treatment and start spacing no further then 3-5" from each track end. |
| 4. |
Place the 2nd endstop, and the track is ready
for installation. |
|
