|
|
Headrail:
Measures 1" high by 1-1/2" deep. Headrail design to include rolled
edges at top, light blocking lip at the lower back side and a curved
headrail face similar to the crown of a 1" slat. Headrail is
phosphate-treated steel and is finished with a vinyl primer and topcoat
of polyester-baked enamel and shall measure 0.025" thick. |
|
|
Tilter: Is a worm and gear design in a fully enclosed
housing. Design incorporates a clutch mechanism to eliminate damage due
to over tilting. |
|
|
Tilt Wand: Solid, transparent with a hexagonal cross section
.250" across points. |
|
|
Cord Lock: Is a snap-in design with stainless steel wear guard
and a floating locking pin and is crash proof.
|
|
|
Drums & Cradles: Are low friction thermoplastic with smooth
hole edges to position ladders. |
|
|
Installation Brackets: Snap-in hidden brackets are made of zinc
plated steel. Brackets allow adequate space to accommodate power
screwdriver for mounting. The brackets facilitate easy installation and
removal of headrail channel. Additional brackets are supplied for
blinds over 60". Optional steel and support box brackets are available
in a limited color offering. |
|
|
Ladders (slat supports): Braided ladder with adequate overlap
of slats; standard spacing is 21.5 mm, optional 20 mm and 22.5 spacing
is also available. |
|
|
Slats: Made of USA manufactured cold rolled aluminum alloy.
Slats are nominally 1" wide and available in standard 0.006" or optional
0.008" thickness. Slats are finished with a polyester-baked enamel with
a durable antistatic, antimicrobial paint finish. a) Privacy Slat
Option provides 18 mm ladder spacing and cord holes that are offset
and hidden by slat overlap for enhanced light control when slats are
tilted down.
|
|
|
Slat Design (select one):
- a. Unperforated
- b. Perforated - slats are perforated
with an openness factor of
6%. Available in 6
colors:
White Satin, Alabaster, Brushed Aluminum, Smokey Gray, Char Brown, and
Black Satin.
|
|
|
Bottomrail: Enclosed tubular shade, .025" thick phosphate
treated steel with prime coat of vinyl primer and finish coat of
polyester baked enamel matching headrail and coordinating slat color.
Bottomrail shall be roll-formed with locking grove to receive dust
cover. |
|
|
Options:
- a. Top Locking cord
lock
- b. Ring pull
- c. Restrictive Cam
Tilter
- d. Special
Installation Brackets
- e. Cord Tilter
- f. Accent
channels
|
